Piste:
Différences
Ci-dessous, les différences entre deux révisions de la page.
| Prochaine révision | Révision précédente | ||
|
auto:elise:modifications [2015/08/18 07:21] ebelhomme créée |
auto:elise:modifications [2015/08/18 08:38] (Version actuelle) ebelhomme [Electricité] |
||
|---|---|---|---|
| Ligne 105: | Ligne 105: | ||
| Et tant qu'à faire, les amortisseurs seront retournés chez Öhlins afin d' | Et tant qu'à faire, les amortisseurs seront retournés chez Öhlins afin d' | ||
| + | |||
| + | ==== Electricité ==== | ||
| + | |||
| + | === ODB sur l' | ||
| + | |||
| + | The CAN_H and CAN_L connections to the ECU can be made in the green end of the ECU serial lead. | ||
| + | |||
| + | ^ ECU Com port ^ ODB port ^ | ||
| + | | pin 1 | CAN_H | | ||
| + | | pin 2 | CAN_L | | ||
| + | |||
| + | This is detailed on page 61 of the Emerald manual. | ||
| + | |||
| + | For what you are doing there is no need to add any resistors to the CAN connections. | ||
| + | |||
| + | To enable the OBD CAN protocol inside the ECU you will need to update the firmware. | ||
| + | Now that I have your serial number I can generate the firmware file and I will email this to you along with install instructions on Monday. | ||
| + | |||
| + | Best regards, | ||
| + | Karl | ||